EXTRA TIP UPDATED
This is a follow up from our Previous post:
Some devices are different and may want to prove stubborn, so here’s an extra tip just in case the steps above didn’t work for you.
- TO CHANGE IMEI FOR SIM1 OR DEVICES WITH ONE-SIM ONLY:
Type the following command then Press Enter or click SEND AT COMMAND
echo ‘AT+EGMR=1,7, “IMEI_NUMBER” ‘ >/dev/
- TO CHANGE IMEI FOR SIM2 (DUAL SIM):
If your phone is dual-sim, type this
command: echo ‘AT+EGMR=1,10,
“IMEI_NUMBER” ‘ >/dev/pttycmd1
Press ENTER or SEND AT COMMAND
UPDATE FOR THOSE USING INFINIX HOT X507
if you get errors saying “Sending Failed” or “module not supported for device errors”
Make sure you leave a Space between ‘AT+EGMR= (and) the IMEI Number
Now Click SEND AT command, You’ll get response “AT command is mSent”
Now restart your Infinix Hot. That’s all.
Yes we are done… now you can restart the phone and check the IMEI. See if it worked by dialing *#06#
EXTRA TIP: FOR THOSE USING GLO NG
Download this App to Generate a BB IMEI
Now apply the imei to your phone using the steps we talked about above or previous page.
You can get 3gb and use it to browse after you change it to IMEI of Blackberry phone.
Activate a Glo BIS Plan.
- Comonth to 777 (3GB) for 1,000Naira
- Coweek to 777 (700Mb) for 400Naira
Set APN – blackberry.net
and you are good to go. Enjoy the Speed!
Found this Helpful? You can click our Share Buttons to Bookmark this page and let friends know about it.
Your Comments are also welcome.
Please I'm trying to do it on tecnoQ5 and respond is failed to send…please let me know if i'm correct …. Using sim 1 .. AT+EGMR=1,10,""351112231232134 .. then i click on send and its showing failed.. please let me know if the phone does not support it and what of types of tecno can work for.. thanks
Dud for sim 1 you have to choose AT+EGMR=1,7,"IMEI" and then click on send command button….